Clim (Basic Cli Control: 3300-3999) - Fujitsu XG1200 User Manual

XG1200 User's Guide
Message
IDSeverity
P3215
INFO
P3216
INFO
P3217
INFO
P3218
INFO
S3219
WARNING
A.2.5

clim (Basic CLI Control: 3300-3999)

Message
IDSeverity
P3300
INFO
P3301
INFO
P3302
INFO
P3303
INFO
P3304
INFO
P3305
INFO
P3306
INFO
IGMP snooping has deleted multicast group address. group(%1$) vlan-%2$ agg-port %3$
Explanation
IGMP snooping has deleted a multicast group MAC address.
[[Inserted string]]%1$: Deleted IP group address
[[Inserted string]]%2$: Deleted VLAN ID
[[Inserted string]]%3$: Deleted aggregation group number
IGMP snooping has deleted multicast group address. Group(%1$) vlan-%2$ port %3$
Explanation
IGMP snooping has deleted a multicast group MAC address.
[[Inserted string]]%1$: Deleted IP group address
[[Inserted string]]%2$: Deleted VLAN ID
[[Inserted string]]%3$: Deleted group number
IGMP snooping has deleted
vlan-%2$ agg-port %3$
Explanation
IGMP snooping has deleted a multicast group MAC address of a multicast router's port.
[[Inserted string]]%1$: Deleted IP group address
[[Inserted string]]%2$: Deleted VLAN ID
[[Inserted string]]%3$: Aggregation group number assigned to deleted multicast router
IGMP snooping has deleted
vlan-%2$ port %3$
Explanation
IGMP snooping has deleted a multicast group MAC address of a multicast router's port.
[[Inserted string]]%1$: Deleted IP group address
[[Inserted string]]%2$: Deleted VLAN ID
[[Inserted string]]%3$: Port number assigned to deleted multicast router
Cannot register group address more than %1$ per system by IGMP snooping. vlan($2$)
Explanation
Since the number of group addresses that can be registered using IGMP Snooping has reached the upper limit,
no more group addresses can be registered.
[[Inserted string]]%1$: The maximum number of groups that can be registered for the entire switch
[[Inserted string]]%2$: Failed VLAN registration
Solution
Review the registered multicast group addresses using the "show bridge mac-address-table" command to
delete unnecessary multicast address.
cmd-exec[startup]: %1$
Explanation
The command in the startup-config was executed.
[[Inserted string]]%1$: Command string executed in the startup-config.
cmd-result[startup]: success
Explanation
The command in the startup-config was successfully completed.
cmd-result[startup]: error
Explanation
The command in the startup-config was failed.
startup-config start.
Explanation
Starts startup-config processing.
startup-config end.
Explanation
Startup-config processing was successfully completed.
Line has connected. line-ID=%1$
Explanation
Telnet terminal was connected.
[[Inserted string]]%1$: Terminal ID
startup-config end(none).
Explanation
startup-config was not found.
All Rights Reserved, Copyright (C) PFU LIMITED 2005
Message/Explanation/Solution
multicast group address
multicast group address
Message/Explanation/Solution
235/258
of mrouter. group(%1$)
of mrouter. group(%1$)