Snmp Traps Settings; Snmp User Table - D-Link DES-1228/ME User Manual

SNMP Traps Settings

The following window is used to enable and disable trap settings for the SNMP function on the Switch. To view this window for
configuration, click Administration > SNMP Manager > SNMP Trap Settings:
To enable or disable the Traps State and/or the Authenticate Traps State, use the corresponding pull-down menu to change and
click Apply.

SNMP User Table

This window displays all of the SNMP User's currently configured on the Switch. . To view this window, click Administration >
SNMP Manager > SNMP User Table:
To delete an existing SNMP User Table entry, click the
delete.
To display the detailed entry for a given user, click on the hyperlinked username under the Display heading. This will open the
SNMP User Table Display window, as shown below.
The following parameters are displayed:
Parameter
User Name
Group Name
SNMP Version
DES-1228/ME Layer 2 Fast Ethernet Managed Switch
Figure 6- 28. SNMP Trap Settings window
Figure 6- 29. SNMP User Table window
Figure 6- 30. SNMP User Table Display window
Description
An alphanumeric string of up to 32 characters. This is used to identify the SNMP users.
This name is used to specify the SNMP group created can request SNMP messages.
V1 - Indicates that SNMP version 1 is in use.
below the Delete heading corresponding to the entry you wish to
55