Circontrol Raption Series User Manual page 71

CHARGE:
The Charge Point is capable of balancing the available power based on the number
of outlets in use.
Value
Power Balance The Charge Point is capable of balancing the available power based
on the number of outlets in use (only available in Master-Satellite
solution).
ENABLE: the Charge Point shares equally the power delivered
to each ongoing Charge Transaction without exceeding the limit
configured.
DISABLED: the Charge Point does not take in consideration any
limit, giving the maximum power for each connector.
Profiles It lets to choose whether from the EV transaction and lock should
be disconnected or not and choose the charging cable connection
timeout in seconds.
idTag option enabled adds a prefix indicating the method of
identification chosen by the user, as shown in the table below:
Method of identification
RFID
Contactless Payment
PIN-code
Plug&Charge
NOTE:
Option only available
in Master-Satellite
solution, see Master-
Satellite user manual
for more information.
Description
Prefix
RF
CC
KC
NA
64