Circontrol Raption Series User Manual page 53

4.3 Open a web browser and type http://192.168.1.1 . Use the following parameters
when prompted for authentication, and then either click Login with your mouse or
press the Enter key.
User name: admin
Password: Admin001
You have now successfully logged into the RUT240!, from here on out you can
configure almost any aspect of your router.
4.4 Configuration Wizard will start after logging in. It is necessary to complete
Configuration Wizard to setup modem to the correct mode.
Go to Status > Network > Mobile and pay attention to 'Sim card state' field, it has
to be Ready.
See note in
next page
46