Circontrol Raption Series User Manual page 88

Raption Series User Manual
Go to the Setup Webpage > 'Integrations' tab > 'General' tab
Choose the option selected under 'Available integrations' according to your backend
policies as shown in the picture:
Charge Point supports different versions of OCPP but only one can be enabled at the
same time.
When done, please do not forget to save changes pressing 'Apply' button just below
the option list.
NOTE: Charge Point is working as stand-alone if 'none' option is selected.
All ID cards are authorized to start/stop a new charge transaction and no
requests are sent to the backend.
81