Circontrol Raption Series User Manual page 52

Raption Series User Manual
4 — L O G G I N G I N
After you're complete with the setting up as described in the section above, you are
ready to start logging into your router and start configuring it. This example shows
how to connect through WiFi:
4.1 Connect your ethernet cable in the LAN port and do all the settings being locally
connected (it can also be done from the WAN port when WAN port is configured as
a LAN).
4.2 At your service computer, look for access point named ChargePoint_xxxxxxxxxxxx
(where "x" means the MAC Address), and connect on it.
45
For cibersecurity reasons, modem's WiFi connection is
disabled by default.
In order to enable it, remember to adjust it in charger side, as
explained in section 6.