Monitoring Parameters - Avaya AP-3 User Manual

Monitoring Parameters

NOTE:
For larger networks that include multiple Access Points, you may
prefer to maintain this list on a centralized location using the
RADIUS parameters (see
Monitoring Parameters
Using the show command with the following table parameters will display
operating statistics for the AP (these are the same statistics that are
described in Monitor Information
— staticmp: Displays the ICMP Statistics.
— statarptbl: Displays the IP ARP Table Statistics.
— statbridgetbl: Displays the Learn Table.
— statiapp: Displays the IAPP Statistics.
— statradius: Displays the RADIUS Authentication Statistics.
— statif: Displays information and statistics about the Ethernet
and wireless interfaces.
— stat802.11: Displays additional statistics for the wireless
interfaces.
— statethernet: Displays additional statistics for the Ethernet
interface.
— statmss: Displays station statistics and Wireless Distribution
System links.
A-72
Enable VLAN Management).
for the HTTP Web interface).
Avaya Wireless AP-3 User's Guide