Ip Address Pool Parameters - Avaya AP-3 User Manual

DHCP Server Commands
NOTE:
You must have at least one entry in the DHCP Server IP Address
Pool Table before you can set the DHCP Server Status (dhcpstatus)
to Enable.

IP Address Pool Parameters

Name
DHCP Server IP
Address Pool Table
Table Index
Start IP Address
End IP Address
Width
Default Lease Time
(optional)
Maximum Lease
Time (optional)
Comment (optional)
Status (optional)
A-44
Type Values
Table N/A
Integer User Defined
IpAddress User Defined
IpAddress User Defined
Integer User Defined
Integer32 3600–
86400 sec
(default)
Integer32 3600–
86400 sec
(default)
DisplayString User Defined
Integer enable (1)
disable (2)
delete (3)
Access CLI Parameter
R dhcpippooltbl
N/A index
RW startipaddr
RW endipaddr
RW width
RW defleasetm
RW maxleasetm
RW cmt
RW status
Avaya Wireless AP-3 User's Guide