There are seven alarm groups that can be enabled or disabled:
• Enable Configuration Alarms.
• Enable Security Alarms.
• Enable Wireless Alarms.
• Enable Operational Alarms.
• Enable Flash Memory Alarms.
• Enable TFTP Alarms.
• Enable Image Alarms.
Enable Image Alarms. Place a checkmark in the box provided to enable
a specific group. Remove the checkmark from the box to disable the
alarms.
See
System Alarms (Traps)
Alarm Host Table
To add an entry and enable the AP-3 to send SNMP trap messages to a
Trap Host:
1. Click Add.
Avaya Wireless AP-3 User's Guide
for the list of alarms contained in each group.
Alarms (SNMP Traps)
4-43