Ethernet Configuration Cli Commands - Avaya c360 Installation And Configuration Manual

Avaya C360 Layer 2 Features

Ethernet Configuration CLI Commands

The following table contains a list of the configuration CLI commands for the Ethernet feature.
The rules of syntax and output examples are all set out in detail in the Reference Guide for the
Avaya C360 Converged Stackable Switch, 10-300506.
Table 30: Ethernet Configuration CLI Commands 1 of 2
In order to...
Enable/Disable MAC Aging
Set the MAC aging time in
minutes (0=don't age).
Set the auto negotiation mode of
a port
Administratively enable a port
Administratively disable a port
Set the speed for a 10/100 port
Configure the duplex mode of a
10/100BASE-T port
Configure a name for a port
Set the send/receive mode for
flow-control frames for a full
duplex port
Set the flow control
advertisement for a Gigabit port
when performing
autonegotiation
Set the priority level of a port
Display settings and status for
all ports
Display per-port status
information related to flow
control
Display the flow control
advertisement for a Gigabit port
used to perform auto-negotiation
118 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
Use the following command...
set mac-aging
set mac-aging-time
set port negotiation
set port enable
set port disable
set port speed
set port duplex
set port name
set port flowcontrol
set port
auto-negotiation-flowcontrol-advertisement
set port level
show port
show port flowcontrol
show port
auto-negotiation-flowcontrol-advertisement
1 of 2