Typical Installation; On-Board Indicator Led's - Connect Tech SMARC/SL User Manual

Typical Installation

1. Ensure all external system power supplies are off.
Install the SMARC Module onto the MXM 3.0 Connector U10. Be sure to follow the manufacturer's
2.
directions for proper installation of mounting hardware, heatsink/heatspreader, and any other applicable
requirements from the manufacturer.
3. Install the necessary cables for application. At a minimum these would include:
a) Power cable to the input power connector
b) Connect a video display cable
c) Keyboard and mouse via USB
d) SATA or mSATA hard drive
For additional information on the relevant cables, please see the Cables and Interconnects section of this
manual.
4. Connect the Power Cable to the Power Supply
5. Switch ON the Power Supply. DO NOT power up your system by plugging in live power.

On-Board Indicator LED's

The SMARC/SL Carrier has 7 on-board indicator LEDs.
Document: CTIM-00439
Revision: 0.00
ES France - Mobilité & Systèmes Embarqués
127 rue de Buzenval BP 26 - 92380 Garches
LED Description
D7 GBE ACT#
D8 GBE LINK#
D11 +V_MOD
D12
D13
D14 SATA ACT
D15
Page 21 of 32
Connect Tech Inc. 800-426-8979 | 519-836-1291
Tél. 01 47 95 99 80
Fax. 01 47 01 16 22
www.connecttech.com
+5V
+3.3V
RST
e-mail : mse@es-france.com
Site Web : www.es-france.com
SMARC/SL
Users Guide
Date: 2015/05/25