Switching The Image Display Method - Omron ZFX-C User Manual

How Items Are Displayed on the Logging Monitor
The trends of three parameters can be monitored in the logging monitor.
By displaying the minimum and maximum values, whether or not an NG has occurred can be checked and
judged in real time.
Up to 10,000 items of data can be logged, and the logging monitor data is held in memory until the Controller is
turned OFF.
Vertical axes:
measurement value
Adjusting the scale of the horizontal and vertical axes p.131

Switching the Image Display Method

In the Individual results display or Position correction display, you can hide or reduce the size of images that
are displayed simultaneously with measurement information. Each press of the ↑ UP key/↓ DOWN key
switches the image display as follows:
Full display
Individual result
OK 353ms
Camera 0
0.Bank00
0.Pattern Search
Judge OK
Correlation 92
Position X 462
Position Y 352
Angle 15
Previous Next
Dsplay SW
In the "Variables list," "Data list" or "Judgments list" display, each press of the ↑ UP key/↓ DOWN key toggles
display/hide of the camera image.
No image
Variables list( 0-15)
OK 353ms
Var.0 *******.*** Var.8
Var.1 *******.*** Var.9
Var.2 *******.*** Var.10 *******.***
Var.3 *******.*** Var.11 *******.***
Var.4 *******.*** Var.12 *******.***
Var.5 *******.*** Var.13 *******.***
Var.6 *******.*** Var.14 *******.***
Var.7 *******.*** Var.15 *******.***
Previous Next
Dsplay SW
126
Monitoring the Measurement Status - RUN Mode
Logging monitor/Data0
350
300
250
50
Data 276.000
Log SW
1/4 display
SD OK 353ms
Camera 0
0.Bank00
0.Pattern Search
Judge
Correlation 92
Position X 462
Position Y 352
Angle
Capture Previous
The 1/4 display is available only
for the individual results display
and position correction display.
Image display
OK 353ms
*******.*** Var.0 *******.***
*******.*** Var.1 *******.***
Var.2 *******.***
Var.3 *******.***
Var.4 *******.***
Var.5 *******.***
Var.6 *******.***
Var.7 *******.***
Capture Previous
Warning value (upper limit value)
Warning value (lower limit value)
Horizontal axis: measurement count
100 150 200
Warning Time 15:10:00
Display SW Adjust
The warning is displayed when the measurement result falls
below or exceeds the warning value.
Individual result
OK
15
Next Capture
Diplay SW
Variables list( 0-15)
Var.8 *******.***
Var.9 *******.***
Var.10 *******.***
Var.11 *******.***
Var.12 *******.***
Var.13 *******.***
Var.14 *******.***
Var.15 *******.***
Next Capture
Dsplay SW
No image
Individual result
OK 353ms
Camera 0
0.Bank00
0.Pattern Search
Judge OK
Correlation 92
Position X 462
Position Y 352
Angle 15
Previous Next Capture
Diplay SW
ZFX-C User's Manual