Version Upgrade Information - Omron ZFX-C User Manual

Version Upgrade Information

The following describes the content of the version upgrade.
Ver1.00 → Ver1.20
Changes
The "coordinates mode" function has been newly added to the following measurement items.
Pattern Search, Graphic Search, Flexible Search, Sensitive Search, Area, Labeling, Position, Width,
Grouping, Defect
Camera images can now be displayed also when the "Variables list," "Data list" and "Judgments list"
are displayed in the RUN mode or the ADJ mode.
Measurement data can now be prefixed with time information when measurement information is out-
put on the serial interface or to SD card.
Clearing or holding saved image data in memory can now be selected at bank switching.
Ver1.20 → Ver1.30
Changes
Upper and lower limit values can now be set for area judgment in labeling.
"Angle" has been newly added to the measurement items.
"Angle" and "Graphic Search" have been newly added to the position correction items.
"IMAX" and "IMIN" have been added to the general functions in [Add Func]-[Calculation].
"Display Setting" and "Designate colors" have been added to the system settings.
Ver1.30 → Ver1.40
Changes
he No. of the model having the highest correlation can now be output f
T
"Possible output results".
The "Output position" function has been added to Sensitive Search - "Detailed settings".
The number of display digits for "Variables list," "Data list" and "Judgments list"
modes can be changed.
"Gateway" has been added to the Ethernet communication Setup Items.
The display pattern for "Variables list," "Data list" and "Judgments list"
can be changed.
The type of the display screen can now be set when the controller is started up.
Ver1.40→ Ver1.50
Changes
The "Brightness Control" function was added to image adjustment of areas and labeling.
Bank group No. can now be displayed in the measurement screen.
Up to five of the latest I/O-related errors can now be checked.
The number of commands that can be input by parallel signals has been increased. "Clear measured
data", "Clear error", "Clear parallel terminal"
ZFX-C User's Manual
or Flexible Search -
in the RUN and ADJ
in the RUN and ADJ modes
Version Upgrade Information
Reference
p.75
p.126
p.129
p.141
p.147
Reference
p.69
p.83
p.113
p.116
p.143
Reference
p.58
p.61
p.118
p.139
p.144
p.148
Reference
p.103
p.143
p.153
p.162
231