Setting The Number Of Display Digits - Omron ZFX-C User Manual

Function
OR
NOT
List of operators
The following describes the arithmetic operators that are available for expressions.
Operator
+
-
*
/

Setting the Number of Display Digits

You can change the number of display digits in "Variables list," "Data list" and "Judgments list" in the RUN and
ADJ modes.
MENU mode - [Setup] - [Add Func] - [Calculation] - [Data], [Judge] or [Variables] - [Expression] - [Display
format]
Setting value
Digits of integer
Digits of decimal
Note
Besides changes to the number of display digits, the display pattern of the "Variables list," "Data list" and "Judg-
ments list" can be changed.
p.144
118
Additional Functions
Description
Calculates the logical sum.
When both of the arguments is "0", "0" is returned as the calculation result, and "-1" is
returned for the other argument.
OR (argument1, argument 2)
Calculates the logical NOT.
NOT (argument)
Description of Operation
Addition
Subtraction
Multiplication
Division of real numbers
Description
Sets the number of digits to display at the integer section.
Range: 0 to 8 (default value: 8)
Sets the number of digits to display past the decimal point.
Range: 0 to 3 (default value: 3)
ZFX-C User's Manual