Omron ZFX-C User Manual page 53

Possible output results
The following values can be output when expressions are set.
Item
Judgment result
Correlation
Measurement position
Measurement angle
Search number
Reference position
Reference angle
Position difference
Angle difference
Note
Reference position/angle, position difference/angle difference
Reference position = position of model when
Reference angle =
50
Setting Measurement Items
Description
The judgment result is output. (0:OK, -1:NG, -2: not measured)
The degree of match between the measurement image and model
image are output as a correlation value. (0 to 100)
The X, Y coordinates of the position where the model was found are
output. (-9999.999 to 9999.999)
The rotation angle of the model that was found is output. (-180 to 180) Angle (TH)
The number of searches that have a correlation value at the
correlation lower limit value or above is output. (0 to 99)
The X, Y coordinates when the model was registered are output.
(-9999.999 to 9999.999)
The angle when the model was registered is output. (-180 to 180)
The position difference obtained by "measurement position -
reference position" is output. (-9999.999 to 9999.999)
The angle difference obtained by "measurement position - reference
position" is output. (-180 to 180)
model is registered
angle of model when model
is registered
Measurement position = position of model found by
measurement
Measurement angle = angle of model found by
measurement
Position difference
= measurement position - reference position
Message
Judge (JG)
Correlation (CR)
Position X, Y
(X, Y)
Search count (N)
Reference X, Y
(SX, SY)
Ref. angle (ST)
Position dif. X, Y
(DX, DY)
Angle dif. (DT)
Angle difference
= measurement angle -
reference angle
ZFX-C User's Manual