Output Signal - Omron ZFX-C User Manual

Output Signal

Measurement results are output each time a measurement is made. Measurement values and judgment
results can be output as the measurement results. Up to 32 data are output respectively (except for overall
judgment result outputs.) They are output for the number of times in the expression set at "Calculation".
Expression
Data is output only when the ZFX-C is in the RUN mode; data is not output when the ZFX-C is in ADJ mode.
p.115
Note
After measurements have been made in the RUN mode, the data that is output to the OR and DO signals is retained
until new measurements are made in the RUN mode. The status of these output is retained even if the ZFX-C is
switched from the RUN mode to another Mode.
164
Signal I/O
000 000 000 000 000 000
001 001 001 001 001 001
002 002 002 002 002 002
Data output
127 127 127
Data 31
000 000
001 001
Judgment
002 002
127
output
Judgment 31
000 000
001 001
002 002
127
Variable 31
Only the preset data is output.
For example, only data 0 and data 7 are
output when data 0 and data 7 is set.
Only the preset judgment is output.
For example, only judgments 0 to 15 are
output when judgment 0 is set, and the
remaining judgment results are not output.
ZFX-C User's Manual