Setting Reflection Of Individual Results - Omron ZFX-C User Manual
Vision sensor with built-in lcd monitor
Hide thumbs
Also See for ZFX-C:
- Brochure & specs (15 pages) ,
- User manual (22 pages) ,
- Command reference manual (66 pages)
Table of Contents
Advertisement
Setting Reflection of Individual Results
You can select which item results are to be reflected in the overall judgment that is output to the OR signal of
the parallel interface.
Note
The overall judgment result can be checked in the RUN mode or ADJ mode.
MENU mode - [Setup] - [Add func] - [OR setting]
Setting value
Description
Measurement item
Sets measurement items to be included in the overall judgment to [ON].
Position correction item
Sets position correction items to be included in the overall judgment to [ON].
Calc./variable
Sets whether or not include the results of [Calculation/Variable] in the overall judgment.
Calc./judge
Sets whether or not include the results of [Calculation/Judgment] in the overall judgment.
Calc./alarm
Sets whether or not to include the [Calculation/Logging Monitor] alarm in the overall judg-
ment.
ZFX-C User's Manual
Range: ON (default value), OFF
Range: ON (default value), OFF
Range: ON (default value), OFF
Range: ON (default value), OFF
Range: ON, OFF (default value)
119
Additional Functions
Advertisement
Table of Contents
