Omron ZFX-C User Manual page 44

3
step
Executing automatic setting
AUTO AUTO ESC ESC
SET
Register model
Reference model
Search region
Reference point
Region
Img Adj
Auto
ZFX-C User's Manual
1
Either press the AUTO key on the Controller or select
[AUTO] on screen.
AUTO key
When the automatic setting is executed, the following
parameters are set to their optimum values.
• Img Adj (filter setup)
• Limits (Differs according to measurement item.)
TEA
• Detail (Differs according to measurement item.)
Automatically made settings can be checked in each of the
setup screens.
Detail Limits
Note
AUTO Setting
p.178
Inspection Setup and Measurement
41