Displaying User-Set Parameters Only - Omron VARISPEED F7 User Manual

Displaying User-set Parameters Only

The A2 parameters (user-set parameters) and A1-01 (parameter access level) can be used to establish a param-
eter set that contains only the most important parameters.
Set the number of the parameter to which you want to refer in A2-01 to A2-32, and then set A1-01 to 1. Using
the advanced programming mode you can read and modify A1-01 to A1-03 and the parameters set in A2-01 to
A2-32 only.
Related Parameters
Parameter
No.
A2-01
to User setting parameters
A2-32
Name
Control Methods
Change
Factory during
V/f with
Setting Opera-
V/f
PG
tion
- No A A
Open Closed
Loop Loop
Vector Vector
A A
6
145
6-