Memory Operation; Checking Positioning Operations - Omron CS1W-213 - REV 02-2008 Operation Manual

Position control units
Table of Contents

Advertisement

Memory Operation

List of Program Examples
10-2 Memory Operation

10-2-1 Checking Positioning Operations

Overview
Operation Examples
264
the CX-Programmer, Programming Console and so on to input the ladder
program to the CPU Unit.
7. Checking
Check the operation of each program example.
Memory operation
Direct operation
Linear interpolation
Origin search
Override
Transferring and saving data
• The operation of each positioning sequence can be tested using INDE-
PENDENT START under memory operation.
• Positioning is executed one positioning sequence at a time with INDE-
PENDENT START, according to the contents of each sequence.
• When using INDEPENDENT START, positioning is stopped after the com-
pletion of each positioning sequence, without reference to the completion
code set for that sequence.
The following examples show positioning tests on positioning sequences with
completion codes set either to automatic or continuous.
Operation
starts
Speed (pps)
Checking
operation
Operation
starts
Speed (pps)
Normal
operation
Name
Checking positioning operations
Repeat operation
Cancelling positioning
Positioning with positions in the DM
Area
Inching
Two-axis linear interpolation
Origin search using limit input
Changing speed during pulse output
Copying data
Operation
Operation
starts
starts
Section 10-2
Page
264
269
273
279
282
285
291
294
297
Operation
starts
X axis
X axis

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents