Omron CJ - INSTRUCTIONS REFERENCE MANUAL 07-2009 Reference Manual page 237

3. Instructions
Sample program
When CIO 0.00 is OFF in the following example, the
instructions between JMP0(515) and JME0(516) are
processed as NOP(000) instructions and the outputs
maintain their previous status.
When CIO 0.00 is ON in the following example, the
instructions between JMP0(515) and JME0(516) are
executed normally.
200
0.00
CS/CJ/NSJ Series Instructions Reference Manual (W474)
CIO 0.00 CIO 0.00
ON OFF
Instructions
Normal
processed
execution
as
NOP(000).
(Outputs
remain
unchanged.)