Omron CJ - INSTRUCTIONS REFERENCE MANUAL 07-2009 Reference Manual page 153

2. Summary of Instructions
Instruction Symbol/Operand
Mnemonic
Code
COUNTER WAIT CNTW(814)
CNTW
814
(BCD)
CNTWX N: Counter
818 number
(Binary)
SV: Set value
(CJ2, CS1-H,
I: Count input
CJ1-H, CJ1M, or
CS1D only)
CNTWX(818)
N: Counter
number
SV: Set value
I: Count input
TEN-MS TIMER TMHW(815)
WAIT
TMHW
815
(BCD)
N: Timer number
SV: Set value
TMHWX
TMHWX(817)
817
(Binary)
(CJ2, CS1-H,
CJ1-H, CJ1M, or
CS1D only)
N: Timer number
SV: Set value
LOOP ---
LOOP
809
116
Delays execution of the rest of the block program until the specified count
N
has been achieved. Execution will be continued from the next instruction
SV
after CNTW(814)/CNTWX(818) when the counter counts out.
N
SV
C
Delays execution of the rest of the block program until the specified
N
time has elapsed. Execution will be continued from the next
SV
instruction after TMHW(815)/TMHWX(818) when the timer times out.
N
SV
BEND
C
LOOP(809) designates the beginning of the loop program.
Execution condition
Function
SV: 0 to 9,999 times for BCD and
0 to 65,535 times for binary
"A"
executed.
SV
Time elapsed.
preset.
"B" executed.
"C" executed.
"C" "C"
executed. executed.
SV: 0 to 99.99 s for BCD
and 0 to 655.35 s for binary
"A"
executed.
SV
preset. Time elapsed.
"B" executed.
"C" executed.
Execution Execution Execution
condition condition condition
ON OFF OFF
Loop repeated
CS/CJ/NSJ Series Instructions Reference Manual (W474)
Location Page
Execution
condition
Block program 1028
Required
Block program 1030
Required
Block program 1033
Required
Execution
condition
OFF