Omron CJ - INSTRUCTIONS REFERENCE MANUAL 07-2009 Reference Manual page 22

Unit Versions and Programming Devices
Unit Versions and Programming Devices
CPU Unit
CS/CJ-series unit Functions added
version 4.0 for unit version
4.0
CS/CJ-series unit Functions added
version 3.0 for unit version
3.0
CS/CJ-series unit Functions added
version2.0 for unit version
2.0
CS1D CPU Units Functions added
for Single-CPU for unit version
Systems, unit ver- 2.0
sion 2.0
CS1D CPU Units Functions added
for Duplex-CPU for unit version
Systems, unit ver- 1.1
sion 1.
Note
CS/CJ/NSJ Series Instructions Reference Manual (W474)
The following tables show the relationship between unit versions and CX-Pro-
grammer versions.
Functions (See note 1.)
Using new functions
Not using new functions
Using new functions
Not using new functions
Using new functions
Not using new functions
Using new functions
Not using new functions
Using function blocks
Not using function blocks OK
1. As shown above, there is no need to upgrade to CX-Programmer version
as long as the functions added for unit versions are not used.
2. CX-Programmer version 7.1 or higher is required to use the new functions
of the CJ1-H-R CPU Units. CX-Programmer version 7.22 or higher is re-
quired to use unit version 4.1 of the CJ1-H-R CPU Units. You can check
the CX-Programmer version using the About menu command to display
version information.
3. CX-Programmer version 7.0 or higher is required to use the functional im-
provements made for unit version 4.0 of the CS/CJ-series CPU Units. With
CX-Programmer version 7.2 or higher, you can use even more expanded
functionality.
CX-Programmer
Ver. 3.3 Ver. 4.0 Ver. 5.0
or lower
Ver. 6.0
--- --- ---
OK OK OK
--- --- OK
OK OK OK
--- OK OK
OK OK OK
--- OK OK
--- OK OK
OK OK
Program-
ming Con-
Ver. 7.0
sole
or higher
OK (See No
note 2 restrictions
and 3.)
OK
OK
OK
OK
OK
OK
OK
OK
xxiii