Function
AND TST
AND TST(350) is used in the program like AND; the execution condition is ON when the specified bit in
the specified word is ON, and OFF when the bit is OFF.
AND TSTN
AND TSTN(351) is used in the program like AND NOT; the execution condition is OFF when the
specified bit in the specified word is ON, and ON when the bit is OFF.
Precautions
• TST(350) and TSTN(351) are intermediate instructions, i.e., they cannot be used as right-hand
instructions. Be sure to program a right-hand instruction after TST(350) or TSTN(351).
Example Programming
0.00
0.00
CS/CJ/NSJ Series Instructions Reference Manual (W474)
i
0.01
In the left example, CIO 0.01 is turned ON when
CIO 0.00 and bit 3 of D10 are both ON.
D10
&3
0.01
In the left example, CIO 0.01 is turned ON when
CIO 0.00 is ON and bit 5 of D10 is OFF.
D10
&5
3. Instructions
3
155
Need help?
Do you have a question about the CJ - INSTRUCTIONS and is the answer not in the manual?