Omron CJ - INSTRUCTIONS Reference Manual page 117

Instruction Symbol/Operand
Mnemonic
Code
FLOATING SYM-
Using LD:
BOL COMPARI-
SON (CJ2, CS1-
Symbol, option
H, CJ1-H, CJ1M,
S1
or CS1D only)
S2
LD, AND. or OR
+
Using AND:
=F (329),
Symbol, option
<>F (330),
S1
<F (331),
<=F (332),
S2
>F (333),
Using OR:
or >=F (334)
Symbol, option
S1
S2
S1: Comparison data 1
S2: Comparison data 2
FLOATING-
POINT TO ASCII
FSTR(448)
(CJ2, CS1-H,
CJ1-H, CJ1M, or
CS1D only)
FSTR
@FSTR
448
S: 1st source
word
C: Control word
D: Destination
word
ASCII TO FLOAT-
ING-POINT (CJ2, FVAL(449)
CS1-H, CJ1-H,
S
CJ1M, or CS1D
only)
D
FVAL
@FVAL
S: Source word
449
D: 1st destination
word
MOVE FLOAT-
MOVF(469)
ING-POINT
(SINGLE)
S
(CJ2, CJ1-H-R
and CJ2 only)
D
MOVF
@MOVF S: First source
469 word
D: First destination
word
CS/CJ/NSJ Series Instructions Reference Manual (W474)
Compares the specified single-precision data (32 bits) or constants
and creates an ON execution condition if the comparison result is true.
Three kinds of symbols can be used with the floating-point symbol
comparison instructions: LD (Load), AND, and OR.
Converts the specified single-precision floating-point data (32-bit deci-
mal-point or exponential format) to text string data (ASCII) and outputs
the result to the destination word.
S
C
D
Converts the specified text string (ASCII) representation of single-pre-
cision floating-point data (decimal-point or exponential format) to 32-bit
single-precision floating-point data and outputs the result to the desti-
nation words.
Transfers the specified 32-bit floating-point number to the destination
words.
S+1
D+1 D
2. Summary of Instructions
Function
S
Location Page
Execution
condition
LD: 502
Not required
AND or OR:
Required
2
Output 505
required
Output 510
required
Output 514
required
79