Tmuh/Tmuhx - Omron CJ - INSTRUCTIONS Reference Manual

TMUH/TMUHX

Instruction
HUNDREDTH-MS TIMER
BCD
Symbol
Applicable Program Areas
Function block
Area
definitions
Usage OK
Operands
Operand
N Timer Number
S Set Value
N: Timer Number
The timer number must be between 0000 and 4095 (decimal).
S: Set Value
The set value must be between #0000 and 9999 (BCD).
&0 to 65535 decimal or #0000 to FFFF hex (Binary).
Operand Specifications
Word addresses
Area
CIO WR HR
N --- --- ---
S OK OK OK
Flags
Name
Error Flag
Equals Flag
Negative Flag
CS/CJ/NSJ Series Instructions Reference Manual (W474)
Mnemonic Variations
TMUH ---
TMUHX ---
TMUH
TMUH(541)
N
N: Timer number
S
S: Set value
Block program areas Step program areas
Not allowed OK
Description
AR T C DM EM
--- --- --- ---
OK
OK OK OK OK
Label
P_ER • ON if timer number N is indirectly addressed through an Index Register but the address in the Index
Register is not the address of a timer's Completion Flag or PV.
• ON if in BCD mode and S does not contain BCD data.
• OFF in all other cases.
P_EQ Unchanged
P_N Unchanged
Function
code
544
TMUH(544)/TMUHX(557) operates a decrement-
ing timer with units of 0.01-ms.
557
Binary
Subroutines
OK
Data type
TMUH
TIMER
WORD
Indirect DM/EM
addresses
Con-
stants
@DM *DM
DR
@EM *EM
--- --- --- ---
OK OK OK OK
Operation
3. Instructions
Function
TMUHX
TMUHX(557)
N N: Timer number
S
S: Set value
SFC action or transition
Interrupt tasks
programs
Not allowed OK
Size
TMUHX
TIMER 1
UINT 1
Registers Flags
Pulse
bits
Indirect
IR TK CF
using IR
--- OK --- ---
3
TR
bits
--- ---
231