Error Log Clear: 21 03; Fins Write Access Log Read: 21 40 - Omron CJ - REFERENCE MANUAL 07-2009 Reference Manual

FINS Commands

5-3-29 ERROR LOG CLEAR: 21 03

Execution Conditions
Command Format
Response Format
Comments

5-3-30 FINS WRITE ACCESS LOG READ: 21 40

Execution Conditions
Command Format
If the data is too large and exceeds the permissible length of the response for-
mat, the part in excess will not be read and a normal response will be
returned.
Clears all error log pointers to 0.
Access right at
other device
No
RUN mode
OK
21 03
Command
format
21 03
Command End code
format
End code (response)
Refer to 5-1-3 End Codes for information on end codes.
This command clears the number of error log records that are stored. It does
not clear data from the error log area.
The CPU Unit automatically keeps a log of any access for FINS write com-
mands regardless of the setting. This command reads this log, which tells the
nodes and time when there was access.
Access right at
other device
OK
RUN mode
OK
21 40
Command
Beginning
code
record No.
UM read DIP switch UM write
protection protection
OK OK
MONITOR mode
OK
UM read DIP switch UM
protection write protection
OK OK
MONITOR mode
OK
No. of
records
Section 5-3
Network write
protection
No
PROGRAM mode
OK
Network write
protection
OK
PROGRAM mode
OK
209