Abort - - Xz - Omron CJ - REFERENCE MANUAL 07-2009 Reference Manual

C-mode Command Details
Response Format
1 0
@
x 10 x 10
Unit No.
(BCD)
Limitations
Execution Conditions
Commands
Single Multiple Single
OK No
End Codes
4-3-37 ABORT – – XZ
Command Format
Limitations
Q Q I R
x 16
End code Timer/counter word designation:
Header code
ON/
,
,
OFF
Bit data
ON/OFF
The data is read in the same order in which it was registered with QQMR.
Responses
Multiple RUN
OK OK OK
An end code of 14 (format error) will be returned if the length of the command
is incorrect.
An end code of 19 (not executable) will be returned if there is no registered
data.
End code (Hex)
00
13
14
18
19
21
Aborts the Host Link command that is currently being processed, allowing the
next command to be received.
Multiple responses to a command can be cancelled with this command.
An FCS code and terminator are required.
End Codes
The ABORT command does not receive a response.
ON/
1 0 3 2
x 16 OFF x 10 x 10 x 10
ON: 1; OFF: 0 + word data (BCD)
, 3 2
x 16 x 16 x 16
Word data
CIO, LR, AR, HR, WR,
DM, EM and other word
(Hex) data.
PLC Mode
MON PROG
OK OK
Normal completion
FCS error
Format error
Frame length error
Not executable
Not executable due to CPU Unit CPU error.
1 0
@ X Z
x 10 x 10
Unit No. (BCD)
Header
code
Section 4-3
1 0
,
x 10
Data break
*
1 0
x 16
FCS Terminator
UM Area
Write-protected Read-protected
OK
Contents
* ↵
FCS Terminator
↵
OK
147