Clock Write: 07 02 - Omron CJ - REFERENCE MANUAL 07-2009 Reference Manual

FINS Commands
Response Format
Parameters

5-3-20 CLOCK WRITE: 07 02

Execution Conditions
Command Format
Response Format
Parameters
07 01
Command End code
code
Year
Year, month, day, hour, minute, second, day of week (response)
The year, month, day of month, hour, minute, and second are expressed in
BCD.
Year: The rightmost two digits of the year. (1998, 1999, and 2000 are
expressed as 98, 99, and 00 respectively. 2096 and 2097 will be expressed as
96 and 97.)
Hour: 00 to 23 (BCD).
Day of week: As follows:
Value (hex) 00
Day of week Sun
End code (response)
Refer to 5-1-3 End Codes for information on end codes.
Writes clock information.
Access right at
other device
No
RUN mode
OK
07 02
Command
code Year Month Day Hour
07 02
Command End code
code
Year, month, day, hour, minute, second, day of week (response)
The year, month, day of month, hour, minute, and second are expressed in
BCD.
Year: The rightmost two digits of the year. (1998, 1999, and 2000 are
expressed as 98, 99, and 00 respectively. 2096 and 2097 will be expressed as
96 and 97.)
Hour: 00 to 23 (BCD).
Month Day Hour Minute Second Day of week
01 02 03
Mon Tues Wed
UM read DIP switch UM
protection write protection
OK OK
MONITOR mode
OK
Minute Second Day of week
Section 5-3
04 05 06
Thur Fri Sat
Network write
protection
No
PROGRAM mode
OK
197