Changing Settings - Omron 2D CODE READER User Manual

Section 1
Studying the V400-F

Changing Settings

The setting mode allows you to make changes to reading conditions and system settings. This
section explains operations for the setting mode.
Switch to the setting mode.
Hold down the center button for more than two seconds.
All the LEDs will light up and the [Setting Menu] appears.
Hold down for more
than two seconds.
Make settings
Basic operation for setting mode
Use the right and left buttons to select the desired item, and
then press the center button to confirm the selection.
To close the current menu, select [Exit] and then press the
center button.
Select an item.
Numerical value inputting method
V400-F050/250/350
24
User's Manual
All LEDs light up.
Confirm
(Example) When [Bank Setting] is selected
Indicates that this reading condition is
normally used.
* Only when [Bank Setting] is selected
Move the cursor to the desired item
and press the center button.
Change the value using the right and
left buttons.
Press the center button to confirm the
setting.
Name of currently
selected menu
Select [Exit] to
Select an item.
close the menu.
Selectable menus are
enclosed in a white frame.
The currently
selected item is
enclosed in a
blue frame.
(Cursor)