Setting Discrete I/O Communication Conditions - Omron 2D CODE READER User Manual

Section 3
Setting RS-232C and Discrete I/O Communication Conditions
Setting Discrete I/O Communication
Conditions
This section explains the procedure of setting the input/output of discrete I/O.
1.
Switch to the setting mode.
Hold down the center button for more than two seconds to
activate the setting mode.
"Changing Settings" p.24
2.
Select [System Setting] → [Discrete I/O] from [Setting Menu].
The [Discrete I/O] setting menu will appear.
3.
Make the desired changes to the settings.
4.
Confirm the changes.
Select [OK] to confirm the changes made to the [Discrete
I/O] settings. This will bring you to the operation menu.
If you select [Cancel], the operation menu will reappear
without reflecting the changes.
5.
Save the settings.
Select [Save] from [Setting Menu] to save the settings.
p.56
V400-F050/250/350
48
User's Manual
STILL/LIVE MODE TRIG
UP EXECUTE DOWN
Hold down for more
than two seconds.