Setting Reading Conditions By Teaching - Omron 2D CODE READER User Manual

Section 2
Changing Reading Conditions

Setting Reading Conditions by Teaching

Teaching uses one sample to read it and sets a reading condition based on the results.
1.
Switch to the setting mode.
Hold down the center button for more than two seconds to
activate the setting mode.
"Changing Settings" p.24
2.
Select [Bank Setting] from [Setting Menu].
The [Bank Setting] screen will appear.
3.
From [Bank #00] to [Bank #09], select the
bank to which the teaching results are to be
saved.
The contents of the selected bank are displayed in the
right area of the screen.
[Bank #00] contains the reading condition set by
"Simple Teaching".
The edit menu will be displayed.
4.
Select [Teaching].
The [Teaching] screen will appear and the screen brightness is adjusted automatically.
V400-F050/250/350
30
User's Manual
STILL/LIVE MODE TRIG
UP EXECUTE DOWN
Hold down for more
than two seconds.
Menu name
Displays the name of the currently
selected menu and the name of the
upper hierarchical level.
Exposure time
Displays the currently set exposure
time.
Guidance
Displays the operating method in
brief.