Installing And Connecting The Code Reader; Mounting The Main Unit - Omron 2D CODE READER User Manual

Section 1
Studying the V400-F

Installing and Connecting the Code Reader

.

Mounting the Main Unit

Mount the reader at a distance where the code image can be shot correctly.
There are two mounting methods: "DIN track mounting" and "Base mounting".
Field of Vision and Distance from the Code
• An accurate image will not be obtained if the installation distance is too long or too short. Always use
• The field of vision and installation distance of the V400-F050 vary with the lens to be used.
Glossy Workpieces
Install the Main Unit at an angle so that regular reflective light is not included in the
image.
V400-F050/250/350
18
User's Manual
the installation distance given below.
"Selecting a Lens" p.89
V400-F250
Code
Field of vision
14 × 18.5 mm
Recommended Installation Angle
V400-F250 10°
V400-F350 5°
Installation distance:
100 mm
Code
Model Recommended angle
V400-F350
Installation distance:
200 mm
Field of vision
31 × 42 mm