Setting The Data Format - Omron 2D CODE READER User Manual

Section 3
Setting RS-232C and Discrete I/O Communication Conditions

Setting the Data Format

Set the RS-232Cdata format as follows.
1.
Switch to the setting mode.
Hold down the center button for more than two seconds to
activate the setting mode.
"Changing Settings" p.24
2.
Select [System Setting] → [Data Format] from [Setting Menu].
The [Data Format] setting menu will appear.
3.
Make the desired changes to the settings.
"Description of Format" p.63
4.
Confirm the changes.
Select [OK] to confirm the changes made to the [Data
Format] settings. This will bring you to the operation
menu.
If you select [Cancel], the operation menu will reappear
without reflecting the changes.
5.
Save the settings.
Select [Save] from [Setting Menu] to save the settings.
p.56
V400-F050/250/350
46
User's Manual
STILL/LIVE MODE TRIG
UP EXECUTE DOWN
Hold down for more
than two seconds.