Omron 2D CODE READER User Manual page 32

5.
Adjust the brightness.
Check the automatically adjusted brightness.
To change the brightness, press the right and left buttons.
The brightness is adjusted based on the exposure
time. The longer the exposure time, the brighter
the image but the image is easily blurred if the work
piece is not stationary.
p.91
6.
Confirm the brightness.
Press the center button.
Teaching will start.
When teaching is complete, the teaching results are
displayed.
7.
Checking the results.
Check the teaching results.
To change the reading condition, select the condition item
to be changed. For details, refer to "Setting Reading
Conditions Manually" p.32.
8.
Confirm the reading condition.
Select [OK] to confirm the reading condition. This will
bring you to the operation menu.
If you select [Cancel], the operation menu will reappear
without reflecting the teaching results.
9.
Save the settings.
Select [Save] from [Setting Menu] to save the changes
you have made to the reading condition.
p.56
Changing Reading Conditions
STILL/LIVE MODE TRIG
UP EXECUTE DOWN
Press
STILL/LIVE MODE TRIG
UP EXECUTE DOWN
Press
V400-F050/250/350
Section 2
31
User's Manual