Saving/Initializing All The Settings; Saving All The Settings - Omron 2D CODE READER User Manual

Section 4
Other Settings

Saving/Initializing All the Settings

This section explains how to save all the settings including reading conditions and system
settings, as well as initializing them to the factory settings.

Saving All the Settings

Save all the settings including reading conditions and system settings to the internal
ROM as follows. Once they are saved to the internal ROM, they will not be deleted
even if the power is turned OFF.
1.
Switch to the setting mode.
Hold down the center button for more than two seconds to
activate the setting mode.
"Changing Settings" p.24
2.
Select [Save] from [Setting Menu].
A confirmation menu will appear.
3.
Select [OK].
All the settings will be saved, and the [Setting Menu] will reappear.
V400-F050/250/350
56
User's Manual
STILL/LIVE MODE TRIG
UP EXECUTE DOWN
Hold down for more
than two seconds.