Rs-232C Communications Output - Omron 2D CODE READER User Manual

Section 1
Studying the V400-F

RS-232C Communications Output

This section explains the reading results to be output via RS-232C communication.
When reading is successful
The read data is output in the following format.
Number of read data digits
"Number of read data digits" and "Code quality" are output only if [Digit Data] and
[Checker Data] are set to [ON] in the data format setting.
p.46
When reading has failed
By factory default, an error code is output in the following format. However, it is
possible to make a data format setting so that no error code will be output.
Error code output setting:
Header
V400-F050/250/350
28
User's Manual
Code quality
p.47
?E000 Footer
Error code:
p.26, p.82
Read data