Regulations And Standards; Precautions For Safe Use - Omron 2D CODE READER User Manual

Regulations and Standards

The V400-F050/250/350 complies with the international regulations and standards listed
below.
EC Directives
EN Standards
(European Standards)

Precautions for Safe Use

Observe the following precautions to ensure safe use of the product.
■ Installation Environment Precautions
• Do not use the product in environments with flammable or explosive gases.
• Do not install outdoors.
• Do not install the product close to high-voltage devices and power devices in order to
secure the safety of operation and maintenance.
• During installation, make sure that screws are tightened firmly.
■ Power Supply and Wiring Precautions
• Use the product with the power supply voltages specified in this manual.
• Use a DC power supply with countermeasures against high-voltage spikes (safe
extra low-voltage circuits on the secondary side).
p.20
■ Other Precautions
• If the product becomes extremely hot, or abnormal odors or smoke occurs, stop using
the product immediately, turn OFF the power, and consult with your OMRON
representative.
• Dispose of the product as industrial waste.
• Do not apply pressure or deform the product when disposing of it.
EMC Directive:No.89/336/EEC
EN61326: 1997, +A1: 1998 +A2: 2001 (EMI: Class A)
Power line: 10 m max. Signal line: 30 m max.
Introduction
V400-F050/250/350
User's Manual
5