Section 3
Setting RS-232C and Discrete I/O Communication Conditions
Setting RS-232C Communication Conditions
This section explains how to set RS-232C communication conditions and data format.
Setting Communication Conditions
Set RS-232C communication conditions as follows.
1.
Switch to the setting mode.
Hold down the center button for more than two seconds to
activate the setting mode.
"Changing Settings" p.24
2.
Select [System Setting] → [RS-232C] from [Setting Menu].
The RS-232C setting menu will appear.
3.
Make the desired changes to the settings.
4.
Confirm the changes.
Select [OK] to confirm the changes made to the [RS-
232C] settings. This will bring you to the operation menu.
If you select [Cancel], the operation menu will reappear
without reflecting the changes.
5.
Save the settings.
Select [Save] from [Setting Menu] to save the settings.
p.56
V400-F050/250/350
44
User's Manual
STILL/LIVE MODE
TRIG
UP
EXECUTE DOWN
Hold down for more
than two seconds.