How To Use This Manual - Omron 2D CODE READER User Manual

Introduction

How to Use This Manual

Page Format
Setting Reading Conditions Manually
This section explains how to set reading conditions manually.
1.
Switch to the setting mode.
Hold down the center button for more than two seconds to
activate the setting mode.
"Changing Settings" p.24
2.
Select [Bank Setting] from [Setting Menu].
The [Bank Setting] screen will appear.
3.
From [Bank #00] to [Bank #09], select the
bank to which you want to set reading
condition.
The contents of the selected bank are displayed in the
right area of the screen.
The edit menu will be displayed.
Setting item
Light Channel
Code Type
Shape
Procedure and additional explanations
Information useful during the operation and reference
pages are provided here with special marks to indicate
the kind of information being provided.
V400-F050/250/350
8
User's Manual
Changing Reading Conditions
STILL/LIVE MODE
UP EXECUTE DOWN
Hold down for more
than two seconds.
Settings Details
Select the light to be used.
(For V400-F050)
Right CH.* The light connected to the right light connector will be used.
Left CH. The light connected to the left light connector will be used.
None No light will be used.
Set the code type.
DataMatrix The code will be read as a DataMatrix type code.
QRCode The code will be read as a QRCode type code.
Auto* The code type will be identified automatically.
Select the code shape.
This item is effective only when [DataMatrix] is selected for [Code Type].
Square The code will be read as a square code.
Rectangle The code will be read as a rectangular code.
Auto* The code shape will be identified automatically.
V400-F050/250/350
Section 2
TRIG
31
User's Manual
*This page does not actually exist in this manual.
Section title
Outline
Index label
Provides the section number
and subject matter. Can be
used to immediately open the
desired page.
Screen display
Describes the settings.