Omron 2D CODE READER User Manual page 26

Setting the reading conditions
Select [Bank Setting] from [Setting Menu].
Other settings
Select [System Setting] from [Setting Menu].
[RS-232C]
[Data Format]
[Discrete I/O]
[Display]
[Image Store]
[Bank Switching]
[Version Information] Displays the software version.
Saving the settings
Select [Save] from [Setting Menu].
All the settings including reading conditions will be saved.
Before exiting, make sure to save
the settings in the setting mode.
If the settings are not saved, the
reading conditions and other
settings will be lost.
p.29
• Up to 10 reading conditions are available.
• When a reading condition is selected, its
settings will be displayed in the right area of the
screen.
• Select the desired reading condition from
among the ten conditions, and set each
condition item manually or by teaching.
• Reading conditions can be copied or deleted.
Set RS-232C communication related parameters such as
baud rate and parity.
Set data format setting for RS-232C communication.
Set discrete I/O related settings including trigger mode
and busy input.
Change the monitor display method.
Select the methods for storing images and referring to
stored images.
Change the automatic bank switch retry setting.
Studying the V400-F
Reading condition [Bank #00]
contains the contents of
"Simple Teaching".
p.56
V400-F050/250/350
Section 1
p.44
p.46
p.48
p.52
p.53
p.41
p.58
25
User's Manual