Viewing The Images Read In The Past; Viewing Stored Images - Omron 2D CODE READER User Manual

Viewing the Images Read in the Past

This section explains how to view the images that were read in the past and stored in the
reader temporarily. This will help you analyze the causes of reading failures.
Up to 28 images can be stored in the reader. If more than 28 images are taken, the stored
images will be replaced with new ones, starting from the oldest image. These images will be
deleted when the power is turned OFF.

Viewing Stored Images

View the images that were read in the past and stored in the reader temporarily.
1.
Switch to the setting mode.
Hold down the center button for more than two seconds to
activate the setting mode.
"Changing Settings" p.24
2.
Select [System Setting] → [Image Store] → [Refer to Image] from [Setting Menu].
The [Reference] screen will be displayed.
3.
Press the left or right button to select a saved
image.
Guidance
Displays the operating method in
brief.
Section 4
Other Settings
STILL/LIVE MODE TRIG
UP EXECUTE DOWN
Hold down for more
than two seconds.
Menu name
Displays the name of the currently
selected menu and the name of the
upper hierarchical level.
Saved image No.
Image Nos. (Last 00 to 27) are
assigned to the images, starting
from the latest image.
For instance, when a new image is
taken, the image "Last00" will
change to "Last01".
Status display
Displays an error code or reading
status.
STILL/LIVE MODE TRIG
UP EXECUTE DOWN
Press
V400-F050/250/350
User's Manual
53