Feature Program Control (I300) - Planmeca ProMax 3D Max User Manual

9.2

Feature program control (i300)

Enable / disable features (i310)
User's Manual
Select the option Feature program control (i300) on
Information displays. On this display new features (e.g.
3D ENT programs) can be added to the X-ray unit.
To add new features, first select the option Enable /
disable features (i310). A list of features will appear.
By touching the down arrow at the bottom of the display
more features will appear. On the next displays, touch the
up arrow to return to the previous display.
On the Enable / disable features display, touch the feature
you wish to activate. Enabled features will be marked with
a green check mark. Confirm the selection by touching
Done.
Planmeca ProMax 3D Max 33
INFORMATION DISPLAYS