Figure 7-1 | Example Of Pc With Rs-232 Port (Interface) - Acom 700S User Manual

We highly recommend updating your ACOM 700S amplifier with firmware version 1.8 or
newer.
The ACOM 700S firmware version 1.8 is compatible with all ACOM 700S amplifiers
produced (see Section
For uploading (or backup) a firmware to ACOM 700S you have to use the
distributed by ACOM free of charge. You can download it from
The ACOM Terminal S is available for MS Windows operation systems only.
ACOM Technical Support Team can advise you om Terminal S use in the Windows
environment.
The communicates with the amplifier via the RS-232 interface.
ACOM Terminal S
To use the
ACOM Terminal S
RS-232 port (real port / build-in) as marked on the picture below:
•
For the necessary RS-232 connecting cable see
Page 60 of 92 | S e c t i o n MAINTENANCE
1.4 Product History and Documentation Validity
, you have to install the software on PC equipped with:

Figure 7-1 | Example of PC with RS-232 port (interface)

Figure 7-1 | Example of PC with RS-232 port (interface)
Table 7-2 | RS-232 connection cable wiring
User's Manual | ACOM 700S | 1.8-54 MHz Linear Amplifier
).
ACOM Terminal S
.
www.acom-bg.com
software,
.
April 2024