Figure 7-3 | Pc Device Manager - Acom 700S User Manual

User's Manual | ACOM 700S | 1.8-54 MHz Linear Amplifier
STEP 1 – RS-232 Interface Settings on your PC
Switch On your PC. Connect the "USB to RS-232" converter to any USB port on your
•
computer, and do not connect the converter to the amplifier.
Go to Device Manager on your PC (right mouse click over Windows Start button -> Device
•
Manager). The converter's driver should be installed automatically, and you can see a
situation similar to
Make sure that the correct (newest) driver for your hardware is installed.
Remember the serial (RS-232) port number.
April 2024

Figure 7-3 | PC Device manager

Figure 7-3 | PC Device manager
Figure 7-3 | PC Device manager
(if driver installation is OK).
S e c t i o n MAINTENANCE | Page 63 of 92
Port
number