Firmware; Firmware Versions; Prequistments; Table 7-1 | Acom 700S Firmware Versions History - Acom 700S User Manual

User's Manual | ACOM 700S | 1.8-54 MHz Linear Amplifier

7.5. Firmware

7.5.1. Firmware Versions

The history of available ACOM 700S CPU Module firmware versions is shown in
.
firmware versions history
Version Release Date
1.0 2018
1.6 19.05.2022
1.8 19.02.2024
The new firmware is issued as a file, for example
The latest firmware versions for our products are available at
charge.

7.5.2. Prequistments

Before you change the firmware version, check the new version compatibility with the
revisions of the hardware and of the boot loader in your amplifier (
). If you have any doubts about the versions, please, consult your dealer
FAULTS LOG
before you undertake any action.
When ACOM issues a new firmware version, the user can upload it in the amplifier after he checks the
compatibility. When compatibility is confirmed a return to an earlier version is also possible.
April 2024

Table 7-1 | ACOM 700S firmware versions history

Base firmware version;
Small firmware improvements based on minor hardware changes;
- NEW function: "Active automatic protection"
- CAT interface: properly set power before tune
- Increase threshold for 5V max
- YAESU CAT interface: restore MIC gain after tune
- Improve code readability and add HW division (These changes are purely internal
and have no effect on end user experience)
- Disable Auto-Operate after Hard Fault Error
- Fix: selection of polling time and byte spacing
Table 7-1 | ACOM 700S firmware versions history
ACOM_700S_FW V1.8 - 19.02.2024.DAT
Notes / Summary of changes
www.acom-bg.com
see Figure 5-6 | Menu
S e c t i o n MAINTENANCE | Page 59 of 92
Table 7-1 | ACOM 700S
.
free of