Remote Control; Remote Control Via Acom Ebox; Remote Control Via Rs-232 Interface; Figure 6-1 | Acom Ebox Ethernet Remote Control Device - Acom 700S User Manual

6. REMOTE CONTROL

Remote control of ACOM 700S is provided by either ACOM eBox Ethernet Remote Control device or RS-232
port.

6.1. Remote Control via ACOM eBox

Remote control of ACOM 700S via Internet is provided by the ACOM eBox Ethernet Remote Control device.
The operation of ACOM 700S with ACOM eBox is described in ACOM eBox User's Manual.
For further information, please, see our document
• ACOM eBox User's Manual.
The documentation is available for download at
If you need cable wiring diagrams, please, see our document
• ACOM CAT cables Technical Information
The documentation is available for download at
Use of other remote-control devices is not recommended.

6.2. Remote Control via RS-232 interface

The ACOM 700S may be controlled remotely by the RS-232 port.
For cable connection, please see Section
.
the RS-232 connector
For ACOM 700S RS-232 interface protocol, please, contact your dealer (see Section
1.9 Owner Assistance
Page 54 of 92 | S e c t i o n REMOTE CONTROL

Figure 6-1 | ACOM eBox Ethernet Remote Control device

Figure 6-1 | ACOM eBox Ethernet Remote Control device
2.5.b) RS-232 interface connector
).
User's Manual | ACOM 700S | 1.8-54 MHz Linear Amplifier
.
www.acom-bg.com
.
.
www.acom-bg.com
and
Table 2-3 | Signals and pin out of
April 2024