Menu User Preferences; Figure 5-5 | Menu User Preferences - Acom 700S User Manual

User's Manual | ACOM 700S | 1.8-54 MHz Linear Amplifier

5.4. Menu USER PREFERENCES

a) ANTENNA TUNER/SWITCH INSTALLED
If ACOM 04AT or 06AT antenna tuner is connected, select YES. See Section
and refer to ACOM 04AT or 06AT User's Manual (available for download at
Antenna Tuner
b) AUTOMATIC MENU EXIT
When AUTOMATIC MENU EXIT is turned on, the amplifier exits the currently selected menu if no button
has been pressed for more than 5 minutes.
If AUTOMATIC MENU EXIT is turned off, the amplifier remains in the currently selected menu until the EXIT
button is pushed.
c) AUTO OPERATE
The AUTO OPERATE user setting is described in Sections
d) CALL SIGN
If entered here, a call sign (or another text) will be included in any Fault Log file generated by the amplifier
(see Section
5.5 Menu FAULTS LOG
startup screen.
Use the SELECT and SELECT
and ITEM buttons (up and down arrows) change the characters.
Finish by moving the pointer out of the editable fields by means of the
April 2024

Figure 5-5 | Menu USER PREFERENCES

Figure 5-5 | Menu USER PREFERENCES
3.3 Initial Turning On
). The call sign (or another text) will not replace ACOM 700S logo on the
buttons (left or right arrows) to select the character position. The
S e c t i o n MENUS - SETTINGS AND OPTIONS | Page 51 of 92
4.3 Operation with an External
www.acom-bg.com
and
4.1.c) AUTO OPERATE user setting
SELECT (left arrow) button.
).
.
ITEM