The Auto Math Label - HP 3563A Operating Manual

Math & Auto Math
Math
Auto
The Auto M ath Label
The label (entered with
1.
It is displayed at the top of the table to identify the function of each table. This is helpful when
tables are plotted or stored on disc.
2.
It replaces the AUTO MATH
resolution, and swept sine modes only). This allow you to start the auto math table and display
the results while a measurement is in progress.
3.
It appears on top of the active trace (in the same field as the other
To enter the label, press
the hard keys C except LINE
displayed:
ENTER
SPACE
FORWRD
SPACE
BACKWD
INSERT
ON OFF
DELETE
CHAR
CLEAR
LINE
CANCEL
ALPHA
Labels are limited to two lines of six characters each. Enter the first and second lines separated by a
comma C,).
1 5·22
LABEL MATH) serves three purposes:
softkey label in the
LABEL MATH, and the
and HELP) are converted to their blue labels, and the following menu is
Saves the current alpha entry, displays the label in the table, and exits
the alpha mode.
Moves the cursor one space forward to edit an entry. Use the
"BL"
keys and the key to add blanks.
Moves the cursor one space backward without erasing any characters.
To erase, use BACK SPACE.
When this is pressed ON, characters are inserted at the cursor position.
When pressed OFF, characters are written over existing ones.
Deletes the character at the cursor position.
Clears the alpha entry from the cursor position to the end of the line,
Clears the current entry and exits the alpha mode.
MEAS OISP menu (linear resolution, log
HP 3563A
shifts into the alpha mode. In this mode,
MEAS OISP selections).
ARROW