Menus Dependent on Measurement Mode
Most hardkeys, when pressed, display menus next to the softkeys. For example, when you press
MEAS MODE,
a menu appears next to the softkeys that allows you to select a measurement mode.
It is important to know that the menus for some hardkeys change as the measurement mode
changes. Appendix C, "Menu Diagrams," shows you the menus that appear for all hardkeys.
You may want to use appendix C as a quick reference since it contains, in one place, all menus
for the analyzer.
If you glance through appendix C, you will notice that the menus for the following hardkeys change
when you change the measurement mode. For a description of these hardkeys, see the chapter that
discusses the measurement mode you are using (such
•
MEAS MODE
•
SELECT MEAS
•
MEAS DISP
•
AVG
•
SOURCE
(this menu is the same for Linear Resolution and Time Capture modes)
•
FREQ
(this menu is the same for Linear Resolution and Time Capture modes)
•
VIEW INPUT
Note
The
WINDOW, SELECT TRIG,
Resolution and Swept Sine modes.
Measurement Modes: A Comparison
as·
chapter 3, "Linear Resolution Mode").
and
TRIG DELAY
hardkeys are inactive in Log
Measurement uveovlew
2- 5